[rabbitmq-discuss] access for writing to exchange

[Ruby Cut]

Thanks very much.

On Mon, Feb 13, 2012 at 3:47 PM, Simon MacMullen <simon at rabbitmq.com> wrote:

> No, 2.7.1 will work fine with R14A. It's just that previous versions of
> RabbitMQ had some incompatibility with R15B.
>
> Cheers, Simon
>
>
> On 13/02/12 14:45, Ruby Cut wrote:
>
>> What is this in 2.7.1?
>> Compatibility with Erlang R15B
>>
>> Can I install 2.7.1 directly or I have to upgrade erlang?
>>
>> I currently run  Erlang R14A (erts-5.8) [source] [64-bit]
>>
>>
>>
>> On Mon, Feb 13, 2012 at 3:41 PM, Simon MacMullen <simon at rabbitmq.com
>> <mailto:simon at rabbitmq.com>> wrote:
>>
>>    This is mentioned in the 2.6.0 release notes, but maybe that's a bit
>>    *too* detailed...
>>
>>    http://lists.rabbitmq.com/__**pipermail/rabbitmq-discuss/__**
>> attachments/20110831/36015373/**__attachment.txt<http://lists.rabbitmq.com/__pipermail/rabbitmq-discuss/__attachments/20110831/36015373/__attachment.txt>
>>
>>    <http://lists.rabbitmq.com/**pipermail/rabbitmq-discuss/**
>> attachments/20110831/36015373/**attachment.txt<http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20110831/36015373/attachment.txt>
>> >
>>
>>    Cheers, Simon
>>
>>
>>    On 13/02/12 14:38, Ruby Cut wrote:
>>
>>        Yes, I am using 2.5.1, it looks like am I upgrame mess.
>>
>>        Thanks very much.
>>
>>        I tried to find detailed changelog to check that up, but could find
>>        anything.
>>
>>        http://www.rabbitmq.com/__**changelog.html<http://www.rabbitmq.com/__changelog.html>
>>
>>        <http://www.rabbitmq.com/**changelog.html<http://www.rabbitmq.com/changelog.html>>
>>  this doesn't seem detailed
>>        enough for this case.
>>
>>        On Mon, Feb 13, 2012 at 3:05 PM, Simon MacMullen
>>        <simon at rabbitmq.com <mailto:simon at rabbitmq.com>
>>        <mailto:simon at rabbitmq.com <mailto:simon at rabbitmq.com>>> wrote:
>>
>>            On 13/02/12 14:02, Ruby Cut wrote:
>>
>>                Why do I still need config permission, although I opened
>>                exchange with
>>                passive option.
>>
>>
>>            Are you using an old version? This was changed in 2.6.0
>> (passive
>>            declaration now requires no permission).
>>
>>            Cheers, Simon
>>
>>            --
>>            Simon MacMullen
>>            RabbitMQ, VMware
>>            ______________________________**_____________________
>>            rabbitmq-discuss mailing list
>>            rabbitmq-discuss at lists.__rabbi**__tmq.com<http://rabbi__tmq.com><
>> http://rabbitmq.com>
>>        <mailto:rabbitmq-discuss at __lis**ts.rabbitmq.com<http://lists.rabbitmq.com>
>>        <mailto:rabbitmq-discuss@**lists.rabbitmq.com<rabbitmq-discuss at lists.rabbitmq.com>
>> >>
>>        https://lists.rabbitmq.com/___**_cgi-bin/mailman/listinfo/____**
>> rabbitmq-discuss<https://lists.rabbitmq.com/____cgi-bin/mailman/listinfo/____rabbitmq-discuss>
>>        <https://lists.rabbitmq.com/__**cgi-bin/mailman/listinfo/__**
>> rabbitmq-discuss<https://lists.rabbitmq.com/__cgi-bin/mailman/listinfo/__rabbitmq-discuss>
>> >
>>
>>        <https://lists.rabbitmq.com/__**cgi-bin/mailman/listinfo/__**
>> rabbitmq-discuss<https://lists.rabbitmq.com/__cgi-bin/mailman/listinfo/__rabbitmq-discuss>
>>        <https://lists.rabbitmq.com/**cgi-bin/mailman/listinfo/**
>> rabbitmq-discuss<https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss>
>> >>
>>
>>
>>
>>
>>    --
>>    Simon MacMullen
>>    RabbitMQ, VMware
>>
>>
>>
>
> --
> Simon MacMullen
> RabbitMQ, VMware
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20120213/273e0aa3/attachment.htm>