[rabbitmq-discuss] RabbitMQ communication ports

[Codevally]

Thanks for the comments.

On Feb 4, 3:13 am, Jerry Kuch <jer... at vmware.com> wrote:
> And, although it might have been mentioned earlier in the thread and I
> missed it, the Erlang port mapper daemon's port should be open so that
> cluster nodes can communicate with one another and rabbitmqctl and
> anything based on Erlang distribution can work.
>
> EPMD listens on port 4369 by default.
>
>
>
>
>
>
>
> ----- Original Message -----
> From: "Emile Joubert" <em... at rabbitmq.com>
> To: "Codevally" <codeva... at gmail.com>
>
> Cc: rabbitmq-disc... at lists.rabbitmq.com
> Sent: Friday, February 3, 2012 2:10:49 AM
> Subject: Re: [rabbitmq-discuss] RabbitMQ communication ports
>
> Hi,
>
> On 03/02/12 05:47, Codevally wrote:
> > Other than the 5672 tcp port, what are the other ports RabbitMQ using
> > to communicate. We need to identify the ports before implementing the
> > firewall. Many thanks.
>
> If you only require (non-SSL) AMQP connections then TCP 5672 is
> sufficient. It is typical to run the SSL variant on a different port
> (normally 5671). If you use the STOMP adapter or the management console
> then you will need ports for those. If you wish to query the broker
> across the firewall with the rabbitmqctl tool then you will also need
> the ports described here:http://www.rabbitmq.com/clustering.html#firewall
> If you wish to use LDAP authentication then the relevant outgoing port
> must be open.
>
> -Emile
>
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-disc... at lists.rabbitmq.comhttps://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-disc... at lists.rabbitmq.comhttps://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss