[rabbitmq-discuss] rabbitmq-server doesn't seem to read my cluster config file

[Erwan]

Just a precision : I run
* rabbitmq-server 2.1.1
* erlang R12B-5-10
on CentOS x64

On Thu, Nov 25, 2010 at 2:53 PM, Mark Lui <dr.mark.lui at gmail.com> wrote:

> I have been running into the same issue.  Clustering works fine using
> the clustering transcript in the doc e.g.,
>
> rabbit2$ rabbitmqctl stop_app
> Stopping node rabbit at rabbit2 ...done.
> rabbit2$ rabbitmqctl reset
> Resetting node rabbit at rabbit2 ...done.
> rabbit2$ rabbitmqctl cluster rabbit at rabbit1
> Clustering node rabbit at rabbit2 with [rabbit at rabbit1] ...done.
> rabbit2$ rabbitmqctl start_app
> Starting node rabbit at rabbit2 ...done.
>
> etc...
>
> However using the auto-configuration sections of the docs has not worked.
>
> I tried adding
>
> [
>  {rabbit, [
>        {cluster_nodes, ['rabbit at rabbit1', 'rabbit at rabbit2']}
>  ]},
> ].
>
> to the rabbitmq.config file and got a syntax error.  Then tried
>
> [
>  {rabbit, [
>        {cluster_nodes, ['rabbit at rabbit1', 'rabbit at rabbit2']}
>  ]}
> ].
>
> removing the comma and it did not cluster.  Then tried
>
> ['rabbit at rabbit1', 'rabbit at rabbit2']
>
> in the rabbitmq_cluster.config file and it did not cluster.
>
> I am at a lost as to what I am doing wrong.  We would like to use the
> auto-configuration for an easier CM deployment.  Any insight as what
> is wrong would be appreciated.
>
> Mark
>
>
> On Thu, Nov 25, 2010 at 11:43 AM, Erwan <joserwan at gmail.com> wrote:
> > Hello,
> > I'm trying  to configure a 2 nodes cluster setup. It works if I add a
> node
> > with rabbitmqctl cluster rabbit at server, but it doesn't if I use a config
> > file.
> > Here is my config /etc/rabbitmq/rabbitmq_cluster.config :
> > ['rabbit at server-172160237','rabbit at server-172160224']
> >
> > /etc/hosts is set up :
> > (...)
> > 127.0.0.1 server-172160237
> > 172.16.0.224 server-172160224
> >
> > When I start rabbit-mq server, I have no error, and rabbitmq status
> returns
> > :
> > Status of node 'rabbit at server-172160237' ...
> > [{running_applications,[{rabbit,"RabbitMQ","2.1.1"},
> >                         {os_mon,"CPO  CXC 138 46","2.1.8"},
> >                         {sasl,"SASL  CXC 138 11","2.1.5.4"},
> >                         {mnesia,"MNESIA  CXC 138 12","4.4.7"},
> >                         {stdlib,"ERTS  CXC 138 10","1.15.5"},
> >                         {kernel,"ERTS  CXC 138 10","2.12.5"}]},
> >  {nodes,[{disc,['rabbit at server-172160237']}]},
> >  {running_nodes,['rabbit at server-172160237']}]
> > ...done.
> > I even tried to pass config file as environment variable :
> > RABBITMQ_NODENAME=toto
> > RABBITMQ_CLUSTER_CONFIG_FILE=/etc/rabbitmq/rabbitmq_cluster
> rabbitmq-server
> > and
> > RABBITMQ_NODENAME=toto
> > RABBITMQ_CLUSTER_CONFIG_FILE=/etc/rabbitmq/rabbitmq_cluster.config
> > rabbitmq-server
> >
> > But same result, except that rabbit has been replaced by toto ...
> > Do you see something I may have done wrong ?
> > _______________________________________________
> > rabbitmq-discuss mailing list
> > rabbitmq-discuss at lists.rabbitmq.com
> > https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
> >
> >
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-discuss at lists.rabbitmq.com
> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20101125/d667d024/attachment.htm>