[rabbitmq-discuss] Error while Running RabbitMQ along with pluggins BQL and Shovel
Seema Biradar
seemasbiradar at gmail.com
Mon Feb 8 09:20:11 GMT 2010
Thanks a lot.
It's working fine now... :)
On Mon, Feb 8, 2010 at 1:52 PM, Paul Jones <pauljones23 at gmail.com> wrote:
> Hi Seema,
>
> It looks like the same problem was in the client too. I've fixed that as
> well - so please do the following in your rabbitmq-bql directory:
> make clean
>
> hg pull
> hg up
> make
>
> For note, to make it easier to use the client in this circumstance, the
> client is automatically unpacked in the directory "build/client".
>
> Paul.
>
>
> On Mon, Feb 8, 2010 at 7:28 AM, Seema Biradar <seemasbiradar at gmail.com>wrote:
>
>> Hi,
>>
>> I have Rabbitmq running on the same machine and i am trying to execute the
>> BQL script I am getting the follwing error.
>>
>> *{"init terminating in
>> do_boot",{{badmatch,{error,{{anonymous_queue_empty,<<33
>> bytes>>},{gen_server,call,[<0.41.0>,{call,{'basic.consume',
>> 1,<<32 bytes>>,<<0
>> bytes>>,false,true,false,false},none},infinity]}}}},[{bql_amqp_rpc_client,start,2},{bql_client,connect,5},{bql_shell,s
>>
>>
>> tart,0},{init,start_it,1},{init,start_em,1}]}}
>> *
>> *Crash dump was written to: erl_crash.dump*
>> *init terminating in do_boot ()* <rabbitmq-discuss at lists.rabbitmq.com>
>>
>> On Fri, Feb 5, 2010 at 6:52 PM, Paul Jones <pauljones23 at gmail.com>wrote:
>>
>>> That is indicating that you don't have Rabbit running on the same machine
>>> using the default port. If it is on an alternate page, please refer to the
>>> documentation on the web page for connecting to alternate machines/ports.
>>>
>>>
>>> On Fri, Feb 5, 2010 at 1:14 PM, Seema Biradar <seemasbiradar at gmail.com>wrote:
>>>
>>>>
>>>> I have unpack the rabbitmq-bql-client.zip and ran.
>>>>
>>>> $ sh bql
>>>> {"init terminating in
>>>> do_boot",{{badmatch,{error,econnrefused}},[{amqp_connection,start_network_internal,2},{bql_client,connect,5},{bql_shell,start,0},{init,start_it,1},{init,start_em,1}]}}
>>>> Crash dump was written to: erl_crash.dump
>>>> init terminating in do_boot ()
>>>>
>>>> On Fri, Feb 5, 2010 at 6:33 PM, Paul Jones <pauljones23 at gmail.com>wrote:
>>>>
>>>>> Seema,
>>>>>
>>>>> Did you unpack the client from the zip file, as per the install
>>>>> instructions? The bql script cannot be invoked directly in the source tree -
>>>>> it expects to have approach files put in the right places.
>>>>>
>>>>> Paul.
>>>>>
>>>>>
>>>>> On Fri, Feb 5, 2010 at 11:24 AM, Seema Biradar <
>>>>> seemasbiradar at gmail.com> wrote:
>>>>>
>>>>>> Hi Paul,
>>>>>>
>>>>>> Thanks a lot for detailed steps....now RabbitMq server is running fine
>>>>>> , I am not getting any error while running the server.
>>>>>>
>>>>>> But when i am trying to BQL script i am getting the following error.
>>>>>>
>>>>>> [Scripts]$ ./bql
>>>>>> {"init terminating in
>>>>>> do_boot",{undef,[{bql_shell,start,[]},{init,start_it,1},{init,start_em,1}]}}
>>>>>> init terminating in do_boot ()
>>>>>> Regards
>>>>>> Seema
>>>>>> On Fri, Feb 5, 2010 at 2:16 PM, Paul Jones <pauljones23 at gmail.com>wrote:
>>>>>>
>>>>>>> Hi Seema,
>>>>>>>
>>>>>>> I've just done a fresh checkout with the following steps:
>>>>>>>
>>>>>>> - hg clone http://hg.rabbitmq.com/rabbitmq-public-umbrella
>>>>>>> - cd rabbitmq-public-umbrella
>>>>>>> - make co
>>>>>>> - make
>>>>>>> - cd rabbitmq-bql
>>>>>>> - make clean
>>>>>>> - make
>>>>>>> - mkdir ../rabbitmq-server/plugins
>>>>>>> - cp dist/{amqp_client.ez,rabbitmq-bql.ez,rfc4627_jsonrpc.ez}
>>>>>>> ../rabbitmq-server/plugins
>>>>>>> - cd ../rabbitmq-server
>>>>>>> - make cleandb run
>>>>>>>
>>>>>>> These steps are working for me. Can you confirm what version of
>>>>>>> Erlang you have installed?
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Feb 5, 2010 at 8:33 AM, Seema Biradar <
>>>>>>> seemasbiradar at gmail.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> Hi
>>>>>>>>
>>>>>>>> Yes , I have follwed the same steps mentioned by you......still
>>>>>>>> error exists.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Feb 5, 2010 at 1:57 PM, Paul Jones <pauljones23 at gmail.com>wrote:
>>>>>>>>
>>>>>>>>> So just to verify, you've done the following in rabbitmq-bql:
>>>>>>>>> hg pull
>>>>>>>>> hg up
>>>>>>>>> make clean
>>>>>>>>> make
>>>>>>>>>
>>>>>>>>> and then copied the .ez files into your plugins directory?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, Feb 5, 2010 at 8:22 AM, Seema Biradar <
>>>>>>>>> seemasbiradar at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Paul,
>>>>>>>>>>
>>>>>>>>>> Even after removing the symlink in the plugin folder i am getting
>>>>>>>>>> the same error.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> node : rabbit at linux
>>>>>>>>>> app descriptor:
>>>>>>>>>> /usr/local/lib/erlang/lib/rabbitmq-public-umbrella/rabbitmq-server/scripts/../ebin/rabbit.app
>>>>>>>>>> home dir : /home/
>>>>>>>>>> cookie hash : fISy4G9tmNyABJwnAvHjrQ==
>>>>>>>>>> log : /var/log/rabbitmq/rabbit.log
>>>>>>>>>> sasl log : /var/log/rabbitmq/rabbit-sasl.log
>>>>>>>>>> database dir : /var/lib/rabbitmq/mnesia/rabbit
>>>>>>>>>> starting internal event notification
>>>>>>>>>> system ...done
>>>>>>>>>> starting logging
>>>>>>>>>> server ...done
>>>>>>>>>> starting
>>>>>>>>>> database ...done
>>>>>>>>>> -- kernel ready
>>>>>>>>>> starting alarm
>>>>>>>>>> handler ...done
>>>>>>>>>> starting queue
>>>>>>>>>> supervisor ...done
>>>>>>>>>> starting node
>>>>>>>>>> monitor ...done
>>>>>>>>>> starting cluster
>>>>>>>>>> router ...done
>>>>>>>>>> -- core initialized
>>>>>>>>>> starting empty DB
>>>>>>>>>> check ...done
>>>>>>>>>> starting codec correctness
>>>>>>>>>> check ...done
>>>>>>>>>> starting exchange
>>>>>>>>>> recovery ...done
>>>>>>>>>> starting queue
>>>>>>>>>> recovery ...done
>>>>>>>>>> starting
>>>>>>>>>> persister ...done
>>>>>>>>>> starting guid
>>>>>>>>>> generator ...done
>>>>>>>>>> -- message delivery logic ready
>>>>>>>>>> starting error log
>>>>>>>>>> relay ...done
>>>>>>>>>> starting
>>>>>>>>>> networking ...done
>>>>>>>>>> -- network listeners available
>>>>>>>>>>
>>>>>>>>>> broker running
>>>>>>>>>> Erlang has closed
>>>>>>>>>> {"Kernel pid
>>>>>>>>>> terminated",application_controller,"{application_start_failure,rabbitmq_bql,{shutdown,{rabbitmq_bql,start,[normal,[]]}}}"}
>>>>>>>>>> Crash dump was written to: erl_crash.dump
>>>>>>>>>> Kernel pid terminated (application_controller)
>>>>>>>>>> ({application_start_failure,rabbitmq_bql,{shutdown,{rabbitmq_bql,start,[normal,[]]}}})
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> seema
>>>>>>>>>> On Fri, Feb 5, 2010 at 1:48 PM, Paul Jones <
>>>>>>>>>> pauljones23 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> As a starting point, you should remove the two symlinks in the
>>>>>>>>>>> directory - with the .ez files and the symlinks, you now have the erlang
>>>>>>>>>>> client and bql installed as plugins twice.
>>>>>>>>>>>
>>>>>>>>>>> Once you've done this, are you seeing the exact same error
>>>>>>>>>>> message?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Feb 5, 2010 at 7:47 AM, Seema Biradar <
>>>>>>>>>>> seemasbiradar at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>
>>>>>>>>>>>> Even after downloading erlang-rfc4627 and latest rabbitmq-bql I
>>>>>>>>>>>> am still facing the same error.
>>>>>>>>>>>>
>>>>>>>>>>>> I have downloded erlang-rfc4627 from the site
>>>>>>>>>>>> http://hg.opensource.lshift.net/erlang-rfc4627/
>>>>>>>>>>>>
>>>>>>>>>>>> rabbitmq-bql from
>>>>>>>>>>>> http://hg.rabbitmq.com/rabbitmq-bql/.
>>>>>>>>>>>>
>>>>>>>>>>>> my folder structure is like
>>>>>>>>>>>>
>>>>>>>>>>>> RabbitMQ server :
>>>>>>>>>>>>
>>>>>>>>>>>> /usr/local/lib/erlang/lib/rabbitmq-public-umbrella/rabbitmq-server
>>>>>>>>>>>>
>>>>>>>>>>>> Rabbitmq -BQL
>>>>>>>>>>>> /usr/local/lib/erlang/lib/rabbitmq-public-umbrella/rabbitmq-bql
>>>>>>>>>>>>
>>>>>>>>>>>> Plugin folder of rabbitmq-server contains.
>>>>>>>>>>>>
>>>>>>>>>>>> lrwxrwxrwx 1 root rootuser 28 Feb 4 13:44
>>>>>>>>>>>> rabbitmq-erlang-client -> ../../rabbitmq-erlang-client
>>>>>>>>>>>> -rwxrwxrwx 1 root rootuser 41041 Feb 5 12:35
>>>>>>>>>>>> rfc4627_jsonrpc.ez
>>>>>>>>>>>> -rwxrwxrwx 1 root rootuser 238092 Feb 5 12:37
>>>>>>>>>>>> rabbitmq-bql.ez
>>>>>>>>>>>> -rwxrwxrwx 1 root rootuser 104210 Feb 5 12:37
>>>>>>>>>>>> amqp_client.ez
>>>>>>>>>>>> lrwxrwxrwx 1 root rootuser 18 Feb 5 13:17
>>>>>>>>>>>> rabbitmq-bql -> ../../rabbitmq-bql.
>>>>>>>>>>>>
>>>>>>>>>>>> Please help me on this.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks in advance
>>>>>>>>>>>> Seema
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Feb 4, 2010 at 8:30 PM, Paul Jones <
>>>>>>>>>>>> pauljones23 at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Seema,
>>>>>>>>>>>>>
>>>>>>>>>>>>> It turns out there were two problems in play here. Firstly, as
>>>>>>>>>>>>> Matthew said in his emails, you'll also need the erlang-rfc4627 package.
>>>>>>>>>>>>> You'll also need to pull in the latest change for rabbitmq-bql, since
>>>>>>>>>>>>> unfortunately a change in the erlang client resulted in the plugin breaking.
>>>>>>>>>>>>> I've corrected this, and after being able to reproduce the problem before,
>>>>>>>>>>>>> it is now working for me.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>> Paul.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Feb 4, 2010 at 11:40 AM, Seema Biradar <
>>>>>>>>>>>>> seemasbiradar at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi All,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I am getting the Following error while running the Rabbitmq
>>>>>>>>>>>>>> along with shovel and BQL pluggin.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> broker running
>>>>>>>>>>>>>> Erlang has closed
>>>>>>>>>>>>>> {"Kernel pid
>>>>>>>>>>>>>> terminated",application_controller,"{application_start_failure,rabbitmq_bql,{shutdown,{rabbitmq_bql,start,[normal,[]]}}}"}
>>>>>>>>>>>>>> Crash dump was written to: erl_crash.dump
>>>>>>>>>>>>>> Kernel pid terminated (application_controller)
>>>>>>>>>>>>>> ({application_start_failure,rabbitmq_bql,{shutdown,{rabbitmq_bql,start,[normal,[]]}}})
>>>>>>>>>>>>>> make: *** [run] Error 1
>>>>>>>>>>>>>> here are the steps I followed while running Shovel and
>>>>>>>>>>>>>> RabbitMQ BQL pluggins.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 1. hg clone http://hg.rabbitmq.com/rabbitmq-public-umbrella
>>>>>>>>>>>>>> 2 .cd rabbitmq-public-umbrella
>>>>>>>>>>>>>> 3 .hg clone http://hg.rabbitmq.com/rabbitmq-codegen
>>>>>>>>>>>>>> 4 .hg clone http://hg.rabbitmq.com/rabbitmq-erlang-client
>>>>>>>>>>>>>> 5 .hg clone http://hg.rabbitmq.com/rabbitmq-server
>>>>>>>>>>>>>> 6. hg clone http://hg.rabbitmq.com/rabbitmq-shovel
>>>>>>>>>>>>>> 7. hg clone http://hg.rabbitmq.com/rabbitmq-bql
>>>>>>>>>>>>>> 8. cd rabbitmq-server
>>>>>>>>>>>>>> 9. hg up -C bug16653
>>>>>>>>>>>>>> 10.make -j
>>>>>>>>>>>>>> 11. mkdir -p plugins
>>>>>>>>>>>>>> 12. cd plugins
>>>>>>>>>>>>>> 13. ln -s ../../rabbitmq-erlang-client
>>>>>>>>>>>>>> 14. ln -s ../../rabbitmq-shovel
>>>>>>>>>>>>>> 15. ln -s ../../rabbitmq-bql
>>>>>>>>>>>>>> 16. cd ../../rabbitmq-erlang-client
>>>>>>>>>>>>>> 17. make
>>>>>>>>>>>>>> 18. cd ../rabbitmq-shovel
>>>>>>>>>>>>>> 19. make
>>>>>>>>>>>>>> 18. cd ../rabbitmq-bql
>>>>>>>>>>>>>> 19. make
>>>>>>>>>>>>>> 20. cd ../rabbitmq-server
>>>>>>>>>>>>>> 21. ./scripts/rabbitmq-activate-plugins
>>>>>>>>>>>>>> 22. make cleandb run
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Please let me know your suggestions.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks in adavance.
>>>>>>>>>>>>>> Seema
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> rabbitmq-discuss mailing list
>>>>>>>>>>>>>> rabbitmq-discuss at lists.rabbitmq.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> rabbitmq-discuss mailing list
>> rabbitmq-discuss at lists.rabbitmq.com
>> http://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20100208/529ce40a/attachment.htm
More information about the rabbitmq-discuss
mailing list