[rabbitmq-discuss] Configuration Win7 and Redhat(VM)

Sun May 18 15:26:56 BST 2014

Hi,
I tested the telnet a few times.
It works very good.
I can telnet from Redhat to win7 and vice versa. ( port23 and port 5672 also)
All firewalls,  win7 and RedHat are set as needed.

1.       Can out tell me how to set a small message between the WIN7 and Redhat ?

Just an example message.

2.       How do I configure an exchange ( do I need  to ?)

3.       What are all the parameters I need ?

Thanks
Jonathan

From: rabbitmq-discuss [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Jerry Kuch
Sent: Thursday, May 15, 2014 8:11 PM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Configuration Win7 and Redhat(VM)

And you want a client to open an AMQP connection to the Rabbit broker?  Can you telnet to port 5672, the standard AMQP port? Does anything seem to be listening there?

On Thu, May 15, 2014 at 7:30 AM, Jonathan Kallner <Jonathank at mdg.co.il<mailto:Jonathank at mdg.co.il>> wrote:
The VM is reachable.
It is on the same network as the first unit.
It has a static IP address of its own.
The ping command from the win7 (first unit) to the IP of the VM
Works just fine.
The VM for that matter is just a another computer.

From: rabbitmq-discuss [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com<mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com>] On Behalf Of Jerry Kuch
Sent: Thursday, May 15, 2014 5:26 PM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Configuration Win7 and Redhat(VM)

How is networking set up for the VM?  You'll have to make sure it has an IP address that's actually reachable from any external clients that have to talk to it.

On Thu, May 15, 2014 at 7:02 AM, Jonathan Kallner <Jonathank at mdg.co.il<mailto:Jonathank at mdg.co.il>> wrote:
Hi
I'm new at RabbitMQ and I would appreciate very much your help.

I'm am working on a system with 2 machine connected.
One machine is Win7 OS and the other one is RedHat OS installed on a virtual machine.
( The host computer for the second unit is also Win7).

I managed to install on both machine RabbitMQ and the shovel plugin.
I can work with the Web-UI plugin in both computers,
And I get also a ping from the Redhat VM to the Win7.

Both computer are on the same network.
The Redhat VM has a static ip.

My question is how do I configure each computer ?

1. The Win7 is a client
2. The RedHat is a server.

I need to open a new connection between both the computers.

Thanks

Jonathan

_______________________________________________
rabbitmq-discuss mailing list
rabbitmq-discuss at lists.rabbitmq.com<mailto:rabbitmq-discuss at lists.rabbitmq.com>
https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss<https://urldefense.proofpoint.com/v1/url?u=https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss&k=oIvRg1%2BdGAgOoM1BIlLLqw%3D%3D%0A&r=sF0ZnlnTVu0KrGgVA7hSe29cx%2BPGAwA3H8KZu6lkUvo%3D%0A&m=WFM3QWeQPruE29iyWBiVFnG1NXFeODJxBHx8uJWGjQw%3D%0A&s=4a64f3768247534224ccb48250d0f4eaf554a0e937fcf680fbed46ad34c29cf3>

_______________________________________________
rabbitmq-discuss mailing list
rabbitmq-discuss at lists.rabbitmq.com<mailto:rabbitmq-discuss at lists.rabbitmq.com>
https://urldefense.proofpoint.com/v1/url?u=https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss&k=oIvRg1%2BdGAgOoM1BIlLLqw%3D%3D%0A&r=sF0ZnlnTVu0KrGgVA7hSe29cx%2BPGAwA3H8KZu6lkUvo%3D%0A&m=WFM3QWeQPruE29iyWBiVFnG1NXFeODJxBHx8uJWGjQw%3D%0A&s=4a64f3768247534224ccb48250d0f4eaf554a0e937fcf680fbed46ad34c29cf3

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20140518/59956ece/attachment.html>