[rabbitmq-discuss] Problems with the {cluster_partition_handling, pause_minority} option

David Rodrigues rdgsdavid at gmail.com
Wed Mar 19 14:58:30 GMT 2014


Hi,

Great ! Thank you Simon.

David


On Tue, Mar 18, 2014 at 10:54 AM, Simon MacMullen <simon at rabbitmq.com>wrote:

> Hi. Just to let you know that this has not been forgotten about. I have
> reproduced the problem you describe and am investigating it. The key factor
> seems to be (at a TCP level) that A realises it is disconnected from B but
> not vice versa. Therefore (at an Erlang level) the partition is not
> detected.
>
> It's not specifically to do with pause_minority mode.
>
> I'll post more information when I have it.
>
> Cheers, Simon
>
>
> On 05/03/2014 17:18, David Rodrigues wrote:
>
>> Dear RabbitMQ Community,
>>
>> I'm having some problems with the {cluster_partition_handling,
>> pause_minority} option and I would like to share with you my doubts.
>>
>> First, the architecture. I'm running RabbitMQ 3.2.4 (Erlang R14A) on 3
>> nodes (rabbitmq at rabbitmq-test01, rabbitmq at rabbitmq-test02 and
>> rabbitmq at rabbitmq-test03) on a virtualized platform - quite similar to
>> EC2.  And because of that I have, from time to time, connectivity issues
>> - I know, that's bad ;)
>>
>> Digging into the doc I have found that the best way to handle the
>> problem is using the pause_minority option -
>> https://www.rabbitmq.com/partitions.html.
>>
>> But from time to time my nodes get disconnected from each other and do
>> not recover automatically. Hopefully I have managed to reproduce the
>> problem. Here are the steps.
>>
>> THE CONFIGURATION FILE
>> ***********************************************************
>>
>> My configuration file is quite simple:
>>
>> %% -*- mode: erlang -*-
>> [
>>   {rabbit,
>>    [
>>     {auth_mechanisms, ['PLAIN', 'AMQPLAIN']},
>>     {default_vhost,       <<"/">>},
>>     {default_user,        <<"admin">>},
>>     {default_pass,        <<"admin">>},
>>     {default_permissions, [<<".*">>, <<".*">>, <<".*">>]},
>>     {default_user_tags, [administrator]},
>>     {cluster_partition_handling, pause_minority},
>>     {cluster_nodes, {['rabbitmq at rabbitmq-test01',
>> 'rabbitmq at rabbitmq-test02', 'rabbitmq at rabbitmq-test03'], disc}}
>>    ]},
>>   {kernel, []},
>>   {rabbitmq_management, []},
>>   {rabbitmq_management_agent, []},
>>   {rabbitmq_shovel,
>>    [{shovels, []}
>>    ]},
>>   {rabbitmq_stomp, []},
>>   {rabbitmq_mqtt, []},
>>   {rabbitmq_amqp1_0, []},
>>   {rabbitmq_auth_backend_ldap, []}
>> ].
>>
>> Has you can see, the {cluster_partition_handling, pause_minority} option
>> is there.
>>
>> PAUSE_MINORITY WORKING
>> ***********************************************************
>>
>> When the network outage is long enough, the option works perfectly.
>>
>> To simulate a connection problem on rabbitmq-test03 I run:
>>
>> iptables -A INPUT -s rabbitmq-test01 -j DROP; iptables -A OUTPUT -d
>> rabbitmq-test01 -j DROP
>> iptables -A INPUT -s rabbitmq-test02 -j DROP; iptables -A OUTPUT -d
>> rabbitmq-test02 -j DROP
>>
>> Then wait long enough for the following messages to appear in the logs
>> of rabbitmq-test03 (approximately 180 seconds):
>>
>> =ERROR REPORT==== 5-Mar-2014::16:51:02 ===
>> ** Node 'rabbitmq at rabbitmq-test02' not responding **
>> ** Removing (timedout) connection **
>> =ERROR REPORT==== 5-Mar-2014::16:51:02 ===
>> ** Node 'rabbitmq at rabbitmq-test01' not responding **
>> ** Removing (timedout) connection **
>> =INFO REPORT==== 5-Mar-2014::16:51:02 ===
>> rabbit on node 'rabbitmq at rabbitmq-test02' down
>> =WARNING REPORT==== 5-Mar-2014::16:51:30 ===
>> Cluster minority status detected - awaiting recovery
>> =INFO REPORT==== 5-Mar-2014::16:51:30 ===
>> rabbit on node 'rabbitmq at rabbitmq-test01' down
>> =INFO REPORT==== 5-Mar-2014::16:51:30 ===
>> Stopping RabbitMQ
>> =INFO REPORT==== 5-Mar-2014::16:51:30 ===
>> stopped TCP Listener on [::]:5672
>> =WARNING REPORT==== 5-Mar-2014::16:51:58 ===
>> Cluster minority status detected - awaiting recovery
>>
>> When flushing the rules (iptables -F) the connectivity is reestablished
>> and the cluster works perfectly.
>>
>> In the logs:
>>
>> =INFO REPORT==== 5-Mar-2014::16:52:58 ===
>> started TCP Listener on [::]:5672
>> =INFO REPORT==== 5-Mar-2014::16:52:58 ===
>> rabbit on node 'rabbitmq at rabbitmq-test01' up
>> =INFO REPORT==== 5-Mar-2014::16:52:58 ===
>> rabbit on node 'rabbitmq at rabbitmq-test02' up
>>
>> Finally the cluster status :
>>
>> Cluster status of node 'rabbitmq at rabbitmq-test03' ...
>> [{nodes,[{disc,['rabbitmq at rabbitmq-test01','rabbitmq at rabbitmq-test02',
>>                  'rabbitmq at rabbitmq-test03']}]},
>>   {running_nodes,['rabbitmq at rabbitmq-test01','rabbitmq at rabbitmq-test02',
>>                   'rabbitmq at rabbitmq-test03']},
>>   {partitions,[]}]
>> ...done.
>>
>> So far, so good. The option works flawlessly.
>>
>> PAUSE_MINORITY NOT WORKING
>> ***********************************************************
>>
>> Life is not so bright when the network partition is not long enough.
>>
>> On rabbitmq-test03 I will run my iptables commands again:
>>
>> iptables -A INPUT -s rabbitmq-test01 -j DROP; iptables -A OUTPUT -d
>> rabbitmq-test01 -j DROP
>> iptables -A INPUT -s rabbitmq-test02 -j DROP; iptables -A OUTPUT -d
>> rabbitmq-test02 -j DROP
>>
>> However this time I'll only wait 60 seconds before flushing my rules
>> with iptables -F.
>>
>> And that's the result in rabbitmq-test03 logs:
>>
>> =INFO REPORT==== 5-Mar-2014::16:55:00 ===
>> rabbit on node 'rabbitmq at rabbitmq-test02' down
>> =ERROR REPORT==== 5-Mar-2014::16:55:00 ===
>> Mnesia('rabbitmq at rabbitmq-test03'): ** ERROR ** mnesia_event got
>> {inconsistent_database, running_partitioned_network,
>> 'rabbitmq at rabbitmq-test02'}
>> =INFO REPORT==== 5-Mar-2014::16:55:00 ===
>> rabbit on node 'rabbitmq at rabbitmq-test01' down
>> =INFO REPORT==== 5-Mar-2014::16:55:00 ===
>> Statistics database started.
>> =INFO REPORT==== 5-Mar-2014::16:55:00 ===
>> Statistics database started.
>>
>> Again, the result is quiet ugly on rabbitmq-test01:
>>
>> =ERROR REPORT==== 5-Mar-2014::16:55:00 ===
>> ** Node 'rabbitmq at rabbitmq-test03' not responding **
>> ** Removing (timedout) connection **
>> =INFO REPORT==== 5-Mar-2014::16:55:00 ===
>> rabbit on node 'rabbitmq at rabbitmq-test03' down
>> =INFO REPORT==== 5-Mar-2014::16:55:01 ===
>> global: Name conflict terminating {rabbit_mgmt_db,<2669.1582.0>}
>>
>> Finally my cluster status:
>>
>> Cluster status of node 'rabbitmq at rabbitmq-test03' ...
>> [{nodes,[{disc,['rabbitmq at rabbitmq-test01','rabbitmq at rabbitmq-test02',
>>                  'rabbitmq at rabbitmq-test03']}]},
>>   {running_nodes,['rabbitmq at rabbitmq-test03']},
>>   {partitions,[{'rabbitmq at rabbitmq-test03',['rabbitmq@
>> rabbitmq-test02']}]}]
>> ...done.
>>
>> That's it. Even with the pause_minority option my cluster was
>> disintegrated.
>>
>> SYNOPSIS
>> ***********************************************************
>>
>> In short, if the network outage is long enough everything goes according
>> to the plan and the cluster works perfectly once the connectivity is
>> reestablished. However if the network outage has a intermediate duration
>> (not too short, not too long) the pause_minority option seems not to work.
>>
>> Are you aware of this problem? Is there any solution to cope with this
>> particular situation?
>>
>> Thanks,
>> David
>>
>>
>> _______________________________________________
>> rabbitmq-discuss mailing list
>> rabbitmq-discuss at lists.rabbitmq.com
>> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20140319/01cfb970/attachment.html>


More information about the rabbitmq-discuss mailing list