[rabbitmq-discuss] Error: RabbitMQ.Client.ConnectionFactory.cs - "Only one usage of each socket address (protocol/network address/port) is normally permitted"

[Patrick Kenney]

I am now using a 1k message as described at the rmq faq...
and it is all local at this point and the nic is 1 gig...


...re:
>
> > so the error is fixed, but... I still cannot even come close to the 4000
> > messages per second capability (with better then twice the hardware)
> > described at:
> > http://www.rabbitmq.com/faq.html
>
> You mentioned earlier that your messages are 400 kilobytes each. If you
> have a 100 megabit ethernet, you will saturate your network link at
> around 25 of these per second. If, as you mentioned earlier, you are
> sending 4000 copies of a 400kB message, then with a 100 megabit
> ethernet, you will be unlikely to see the task complete in less than
> two-and-a-half minutes.
>
> Regards,
>   Tony
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20090902/ca977bd3/attachment.htm