Linux version 2.6.18-92.1.22.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Dec 16 11:57:43 EST 2008
Command line: ro root=/dev/VolGroup00/lv.root nousb quiet crashkernel=128M@16M notsc divider=10
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
 BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data)
 BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS)
 BIOS-e820: 000000007ff00000 - 0000000080000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
DMI present.
ACPI: RSDP (v002 PTLTD                                 ) @ 0x00000000000f6940
ACPI: XSDT (v001 INTEL  440BX    0x06040000 VMW  0x01324272) @ 0x000000007fefa13b
ACPI: FADT (v004 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x000000007fefee98
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x000000007fefa1f7
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000007fefa1a7
ACPI: DSDT (v001 PTLTD  Custom   0x06040000 MSFT 0x03000001) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000080000000
Bootmem setup node 0 0000000000000000-0000000080000000
On node 0 totalpages: 515757
  DMA zone: 2693 pages, LIFO batch:0
  DMA32 zone: 513064 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 0:2 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000ca000
Nosave address range: 00000000000ca000 - 00000000000cc000
Nosave address range: 00000000000cc000 - 00000000000dc000
Nosave address range: 00000000000dc000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 00000000000e8000
Nosave address range: 00000000000e8000 - 0000000000100000
Nosave address range: 000000007fef0000 - 000000007feff000
Nosave address range: 000000007feff000 - 000000007ff00000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 515757
Kernel command line: ro root=/dev/VolGroup00/lv.root nousb quiet crashkernel=128M@16M notsc divider=10
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 1925284k/2097152k available (2460k kernel code, 171416k reserved, 1250k data, 196k init)
Calibrating delay using timer specific routine.. 4472.40 BogoMIPS (lpj=2236201)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 4124336
Detected 4.124 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2210.269 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3231k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
Boot video device is 0000:00:0f.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: USB support disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x80
audit: initializing netlink socket (disabled)
audit(1283094841.652:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6D65AF37871D9CBE
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 256M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1060-0x1067, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1068-0x106f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 476k
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.05
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 169
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=169
  Vendor: VMware    Model: Virtual disk      Rev: 1.0 
  Type:   Direct-Access                      ANSI SCSI revision: 02
 target0:0:0: Beginning Domain Validation
 target0:0:0: Domain Validation skipping write tests
 target0:0:0: Ending Domain Validation
 target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
SCSI device sda: 134217728 512-byte hdwr sectors (68719 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
SCSI device sda: 134217728 512-byte hdwr sectors (68719 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
  Vendor: VMware    Model: Virtual disk      Rev: 1.0 
  Type:   Direct-Access                      ANSI SCSI revision: 02
 target0:0:1: Beginning Domain Validation
 target0:0:1: Domain Validation skipping write tests
 target0:0:1: Ending Domain Validation
 target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
SCSI device sdb: 8388608 512-byte hdwr sectors (4295 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: cache data unavailable
sdb: assuming drive cache: write through
SCSI device sdb: 8388608 512-byte hdwr sectors (4295 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: cache data unavailable
sdb: assuming drive cache: write through
 sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1283094849.464:2): selinux=0 auid=4294967295 ses=4294967295
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input2
hda: ATAPI 1X DVD-ROM DVD-R-RAM CD-R/RW drive, 32kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:11.0 to 64
e1000: 0000:00:11.0: e1000_probe: (PCI:66MHz:32-bit) 00:50:56:bf:19:0a
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/lv.swap.  Priority:-1 extents:1 across:2031608k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
VMware memory control driver initialized
vmmemctl: started kernel thread pid=1708
e1000: eth0: e1000_set_tso: TSO is Enabled
ISO 9660 Extensions: RRIP_1991A
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5028
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5043
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5059
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5074
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5090
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5105
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5121
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5136
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5152
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5167
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5183
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5198
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5214
VMware memory control driver unloaded
VMware memory control driver initialized
vmmemctl: started kernel thread pid=5229
VMware memory control driver unloaded
VMware PVSCSI driver - version 1.0.1.1
VMware memory control driver initialized
vmmemctl: started kernel thread pid=6035
VMCI: Major device number is: 253
e1000: eth0: e1000_set_tso: TSO is Enabled