[rabbitmq-discuss] Set rabbitmq to use in Amazon EC2 with different regions

[Ceri Storey]

(25/07/13 12:12), Pedro Sá da Costa wrote:
> If I set the RABBITMQ_NODE_IP_ADDRESS to 0.0.0.0, or I don't set
> the RABBITMQ_NODE_IP_ADDRESS, the message broker starts with the
> internal IP. This means that I cannot access it outside from the
> internet. If I put the public IP, the error continues. How I can set
> rabbitMQ to access is it  from the internet?
What happens if you leave it configured with
RABBITMQ_NODE_IP_ADDRESS=0.0.0.0, but try to connect to the *public* IP
address?
>
>
>
>
>
>
> On 23 July 2013 12:15, Michael Klishin <michael.s.klishin at gmail.com
> <mailto:michael.s.klishin at gmail.com>> wrote:
>
>     2013/7/23 Pedro Sá da Costa <psdc1978 at gmail.com
>     <mailto:psdc1978 at gmail.com>>
>
>         Error description:
>            {could_not_start_tcp_listener,{"XX.235.XXX.XXX",5672}}
>
>
>     Try using 0.0.0.0 for RABBITMQ_NODE_IP_ADDRESS. This will relieve you
>     from having to worry about the exact IP value of the interface.
>     -- 
>     MK
>
>     http://github.com/michaelklishin
>     http://twitter.com/michaelklishin
>
>     _______________________________________________
>     rabbitmq-discuss mailing list
>     rabbitmq-discuss at lists.rabbitmq.com
>     <mailto:rabbitmq-discuss at lists.rabbitmq.com>
>     https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>
>
>
>
> -- 
> Best regards,
>
>
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-discuss at lists.rabbitmq.com
> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20130725/07423f00/attachment.htm>