[rabbitmq-discuss] Rabbitmq boot failure with "tables_not_present"

[Zhao, Shanyu]

Hi Simon,

>-----Original Message-----
>From: Simon MacMullen [mailto:simon at rabbitmq.com]
>Sent: Thursday, January 17, 2013 2:35 AM
>To: Discussions about RabbitMQ
>Cc: Zhao, Shanyu
>Subject: Re: [rabbitmq-discuss] Rabbitmq boot failure with
>"tables_not_present"
>
>On 16/01/13 19:54, Zhao, Shanyu wrote:
>> We have two rabbitmq servers to form a cluster. It mostly runs great.
>> But sometimes after redeploy, we saw some boot failure error in
>> rabbitmq server log.
>
>Hi. I've reproduced the problem. In order for this to occur:
>
>* You must be using the cluster_nodes configuration parameter
>* You must stop all nodes and then fully reset them
>* You must then start all nodes simultaneously
>
>I suspect it's the latter bit which is causing this to be intermittent for
>you. I'll file a bug to get this fixed, but in the mean time if you could
>stagger the start of your cluster nodes (so that one node starts on its own,
>and then others can start simultaneously or apart) that will act as a
>workaround.

Thanks a lot for your help! Yes, our deployment scripts simultaneously deploy the rabbitmq servers for efficiency. I'll try the workaround you mentioned here.

Shanyu

>
>Cheers, Simon
>
>--
>Simon MacMullen
>RabbitMQ, VMware