[rabbitmq-discuss] Clustering
chetan dev
dev440 at gmail.com
Tue Oct 23 10:21:15 BST 2012
Yes , but now the node is failing to start because it is not able to find
other node for clustering
so how do i reset this node to run it normally?
Thanks
On Tue, Oct 23, 2012 at 2:38 PM, Tim Watson <tim at rabbitmq.com> wrote:
> Don't do that - take the second node out of the cluster whilst the other
> node(s) are still running, so that they can see it leaving. See the
> clustering transcripts in http://www.rabbitmq.com/clustering.html for
> details.
>
>
> On 10/23/2012 09:46 AM, chetan dev wrote:
>
> Hi,
>
> Thanks you very much for this information
> another problem i am facing is i have two nodes clustered lets say
> rabbit at SHIKHARM(ram) and rabbit at CHETANDEV(disc)
> now if i stop rabbit at SHIKHARM using rabbitmwctl stop command and then i
> stop rabbit at CHETANDEV using stop_app command and then reset it this way
> i remove it from cluster and restart the node
> now rabbit at CHETANDEV starts and works fine but when i try to start
> rabbit at SHIKHARM it fails .
> i think it is trying to cluster with rabbit at CHETANDEV but that node is
> now not in cluster but is there a way so that i can reset rabbit at SHIKHARMand start it normally
> here is the error that i got:
> node : rabbit at SHIKHARM
> app descriptor : c:/Program Files/RabbitMQ
> Server/rabbitmq_server-2.8.6/sbin/../
> ebin/rabbit.app
> home dir : C:\Users\Acer
> config file(s) : (none)
> cookie hash : +3xbT32/GKScN3yhCcE0Ag==
> log :
> C:/Users/Acer/AppData/Roaming/RabbitMQ/log/rabbit at SHIKHARM.log
> sasl log :
> C:/Users/Acer/AppData/Roaming/RabbitMQ/log/rabbit at SHIKHARM-sasl
> .log
> database dir :
> c:/Users/Acer/AppData/Roaming/RabbitMQ/db/rabbit at SHIKHARM-mnesi
> a
> erlang version : 5.9.1
>
> -- rabbit boot start
> starting file handle cache server
> ...done
> starting worker pool
> ...done
> starting database ...
>
> BOOT FAILED
> ===========
>
> Error description:
> {error,{failed_to_cluster_with,[rabbit at CHETANDEV],
> "Mnesia could not connect to any disc
> nodes."}
> }
>
> Log files (may contain more information):
> C:/Users/Acer/AppData/Roaming/RabbitMQ/log/rabbit at SHIKHARM.log
> C:/Users/Acer/AppData/Roaming/RabbitMQ/log/rabbit at SHIKHARM-sasl.log
>
> Stack trace:
> [{rabbit_mnesia,init_db,3,[]},
> {rabbit_mnesia,init,0,[]},
> {rabbit,'-run_boot_step/1-lc$^1/1-1-',1,[]},
> {rabbit,run_boot_step,1,[]},
> {rabbit,'-start/2-lc$^0/1-0-',1,[]},
> {rabbit,start,2,[]},
> {application_master,start_it_old,4,
> [{file,"application_master.erl"},{line,274}]}]
>
> {"Kernel pid
> terminated",application_controller,"{application_start_failure,rabb
>
> it,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot}}
> }}}"}
>
> Crash dump was written to: erl_crash.dump
> Kernel pid terminated (application_controller)
> ({application_start_failure,rabbi
>
> t,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot}}}
> }})
>
>
>
> Thanks
>
>
>
>
>
> On Tue, Oct 23, 2012 at 1:50 PM, Tim Watson <watson.timothy at gmail.com>wrote:
>
>> Ah of course - sorry i missed that guys. After so recently looking at the
>> 3.0 cluster commands I'd forgotten that the choice of disk/ram was done
>> that way in 2.8.x.
>>
>> On 22 Oct 2012, at 21:26, Matthias Radestock <matthias at rabbitmq.com>
>> wrote:
>>
>> > On 22/10/12 20:28, chetan dev wrote:
>> >>> here is what i am doing
>> >>> 1. two nodes rabbit at SHIKHARM and rabbit at CHETANDEV are clustered
>> >
>> > yes, but...
>> >
>> >>> i clustered them as given on rabbitmq clustering documentation for e.g
>> >>> on the first place both nodes are running
>> >>> now i stopped app using rabbitmqctl stop_app then i reset that node
>> than
>> >>> i clusterd that node with another using rabbitmqctl cluster
>> rabbit at SHIKHARM
>> >>> then i started the node using rabbitmqctl start_app
>> >>> when i checked the cluster status it was showing fine then i did as i
>> >>> mentioned earlier
>> >
>> > That will make rabbit at CHETANDEV a *ram* node. To make both nodes disk
>> nodes the node itself would have to be mentioned in the cluster command
>> too, i.e. 'rabbitmqctl cluster rabbit at SHIKHAR rabbit at CHETANDEV'.
>> >
>> >>> 2. now i stop node rabbit at SHIKHARM using rabbitmqctl stop commnad
>> >>> 3. now i start the node rabbit at SHIKHARM using rabbitmq-server
>> >>> start commnad
>> >
>> > You have just stopped and restarted the clusters' only disk node.
>> Rabbit clusters won't function properly if they have only ram nodes.
>> >
>> >>> 4. and then i check cluster status it shows only one running node
>> >>> Cluster status of node rabbit at CHETANDEV ...
>> >>> [{nodes,[{disc,[rabbit at SHIKHARM]},{ram,[rabbit at CHETANDEV]}]},
>> >>> {running_nodes,[rabbit at CHETANDEV]}]
>> >>> ...done.
>> >
>> > Try running that command against rabbit at SHIKHARM. I suspect it will
>> tell you that it only knows about itself.
>> >
>> > Anyway, I suggest you change your cluster configuration s.t. both nodes
>> are disk nodes.
>> >
>> > Regards,
>> >
>> > Matthias.
>> > _______________________________________________
>> > rabbitmq-discuss mailing list
>> > rabbitmq-discuss at lists.rabbitmq.com
>> > https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>> _______________________________________________
>> rabbitmq-discuss mailing list
>> rabbitmq-discuss at lists.rabbitmq.com
>> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>>
>
>
>
> --
> Cheten Dev
>
> B.Tech Final Year
> Dept. of Electrical Engg.
> IIT Delhi, New Delhi
> ph 8527333215
>
>
>
> _______________________________________________
> rabbitmq-discuss mailing listrabbitmq-discuss at lists.rabbitmq.comhttps://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>
>
>
--
Cheten Dev
B.Tech Final Year
Dept. of Electrical Engg.
IIT Delhi, New Delhi
ph 8527333215
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121023/51afb9ec/attachment.htm>
More information about the rabbitmq-discuss
mailing list