[rabbitmq-discuss] Thank you !

Dhinesh, P [ Maples - IT ] Dhinesh.P at saint-gobain.com
Fri Nov 23 09:14:59 GMT 2012


We are using 6 queues in rabbitmq...

 

And we are sending 2 to 3 MB files from producer to consumer..

 

Actually we required to view message counts 

 

Ø  Number of Message publish to queue from publiser..

Ø  Number of message received from queue to consumer.

 

Thanks and Regards,

 

Dhinesh P

 

From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Jeffery, Mark
Sent: Friday, November 23, 2012 2:13 PM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Thank you !

 

How big are the files that you are passing ?

 

Maybe the figures below are correct ? 

 

How long does it take to transfer an average file on your side ?

 

How many consumers do you have ? ie How many files are transferred concurrently ?

 

From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Dhinesh, P [ Maples - IT ]
Sent: Friday, November 23, 2012 10:20 AM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Thank you !

 

 

Thanks for your reply....

 

While we passing messages to others, it is shows as below screen shot...

 

I need some clarification about messages rate delivery and acknowledge...

 

>Is there possible to monitor how many messages delivery and publish in rabbitmq overview console..

 

>Or any other third party tools available to monitor this kind of information from rabbitmq..

 

 

 

 

 

Regards,

 

Dhinesh P

 

From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Jeffery, Mark
Sent: Friday, November 23, 2012 1:30 PM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Thank you !

 

Hello Dhinesh

 

We did not configure anything to get those values.

We installed the management console as is.

 

Are you sure your message rates are higher than 1/sec at any point in time ?

 

Thanks

 

Jeff

 

From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Dhinesh, P [ Maples - IT ]
Sent: Friday, November 23, 2012 9:42 AM
To: Discussions about RabbitMQ
Subject: Re: [rabbitmq-discuss] Thank you !

 

Dear Jeffery,

 

we are using RabbitMQ 2.8.4 server with Python 2.7..

 

Purpose of using RabbitMQ: -

 

File transferring one server to other server.

 

But we are trying to configure massages rates in Overview console..

 

Could you pls help us to do configure it in our Overview console because I saw in below your mail screen shot and I marked it FYR...

 

Here below I have given the Our server console..

 

 

You have any idea to configure the message rates in RabbitMQ Overview console, kindly share us..

 

Thanks in Advance,

 

Dhinesh P

 

From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Jeffery, Mark
Sent: Friday, November 23, 2012 12:51 PM
To: rabbitmq-discuss at lists.rabbitmq.com
Subject: [rabbitmq-discuss] Thank you !

 

 

Hello

 

Just a mail to say thanks for RabbitMQ.

 

We have implemented it at our open source telephony contact centre.

 

The centre has approximately 500 agents. We used Rabbit for our telephony messaging layer and for some Siebel integration.

 

We installed the cluster (4 nodes, 2 disk and 2 ram) and have not had any trouble.

 

Just one question , if I may :  

The stats below, are they calculated "cluster wide" ? 

ie 11 msg/s across the cluster and 16 Ready messages across the entire cluster?

 

Thanks

 

Jeff

 

 

 

To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser: 
https://www.fnb.co.za/disclaimer.html 

 

If you are unable to access the Disclaimer, send a blank e-mail to firstrandbankdisclaimer at fnb.co.za and we will send you a copy of the Disclaimer.

To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser: 
https://www.fnb.co.za/disclaimer.html 

 

If you are unable to access the Disclaimer, send a blank e-mail to firstrandbankdisclaimer at fnb.co.za and we will send you a copy of the Disclaimer.

To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser: 
https://www.fnb.co.za/disclaimer.html 




 

If you are unable to access the Disclaimer, send a blank e-mail to firstrandbankdisclaimer at fnb.co.za and we will send you a copy of the Disclaimer.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121123/bb726391/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 34057 bytes
Desc: image001.png
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121123/bb726391/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 51526 bytes
Desc: image002.jpg
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121123/bb726391/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 59520 bytes
Desc: image003.png
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121123/bb726391/attachment-0003.png>


More information about the rabbitmq-discuss mailing list