[rabbitmq-discuss] librabbitmq c++ client in VS C++2010

Wed Nov 7 08:50:07 GMT 2012

Anyone with ideas how I can proceed?

On Thursday, November 1, 2012 1:58:09 PM UTC+11, Tinashe wrote:
>
> *I did this:*
>
> C:\development\cpp\rabbitmq-c>"C:\Program Files (x86)\CMake 
> 2.8\bin\cmake.exe" "C:\development\cpp\bin-rabbitmq-c"
> -- Using amqp_codegen.py in C:\development\cpp\rabbitmq-c\codegen
> -- Configuring done
> -- Generating done
> -- Build files have been written to: C:/development/cpp/bin-rabbitmq-c
>
> *and located the nmake and tried this command*
>
> C:\development\cpp\bin-rabbitmq-c>"C:\Program Files 
> (x86)\VisualStudio10.0\VC\bin\nmake.exe"
>
> Microsoft (R) Program Maintenance Utility Version 10.00.30319.01
> Copyright (C) Microsoft Corporation.  All rights reserved.
>
> NMAKE : fatal error U1064: MAKEFILE not found and no target specified
> Stop.
>
>
> On Thursday, November 1, 2012 1:42:33 PM UTC+11, Tinashe wrote:
>>
>> I followed all the instructions up to this point:
>>
>> Build it:
>>
>>    - On linux: make 
>>    - On win32: nmake or msbuild, or open it in visual studio and build 
>>    from there
>>
>> Is nmake or msbuild part of the VS2010? A bunch of projects have been 
>> created that I manage to open with VS C++ 2010, when I try to compile I got 
>> the following errors:
>>
>> 1>------ Build started: Project: ZERO_CHECK, Configuration: Debug Win32 
>> ------
>> 2>------ Build started: Project: rabbitmq, Configuration: Debug Win32 
>> ------
>> 2>  Building Custom Rule 
>> C:/development/cpp/rabbitmq-c/librabbitmq/CMakeLists.txt
>> 2>  CMake does not need to re-run because 
>> C:\development\cpp\bin-rabbitmq-c\librabbitmq\CMakeFiles\generate.stamp is 
>> up-to-date.
>> 2>  Generating codegen.py
>> 2>  Generating amqp_codegen.py
>> 2>  At least one file or directory argument required.
>> 2>  Use --help to show usage.
>> 2>C:\Program Files 
>> (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(151,5): error 
>> MSB6006: "cmd.exe" exited with code 2.
>> 3>------ Build started: Project: test_parse_url, Configuration: Debug 
>> Win32 ------
>> 4>------ Build started: Project: amqp_unbind, Configuration: Debug Win32 
>> ------
>> 5>------ Build started: Project: amqp_sendstring, Configuration: Debug 
>> Win32 ------
>> 6>------ Build started: Project: amqp_rpc_sendstring_client, 
>> Configuration: Debug Win32 ------
>> 3>  test_parse_url.c
>> 6>  amqp_rpc_sendstring_client.c
>> 4>  amqp_unbind.c
>> 5>  amqp_sendstring.c
>> 3>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 4>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 6>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 4>  utils.c
>> 6>  utils.c
>> 5>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 5>  utils.c
>> 4>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 6>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 4>  Generating Code...
>> 7>------ Build started: Project: amqp_producer, Configuration: Debug 
>> Win32 ------
>> 6>  Generating Code...
>> 5>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 5>  Generating Code...
>> 8>------ Build started: Project: amqp_listenq, Configuration: Debug Win32 
>> ------
>> 7>  amqp_producer.c
>> 9>------ Build started: Project: amqp_listen, Configuration: Debug Win32 
>> ------
>> 8>  amqp_listenq.c
>> 7>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 7>  utils.c
>> 8>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 8>  utils.c
>> 7>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 7>  Generating Code...
>> 8>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 8>  Generating Code...
>> 10>------ Build started: Project: amqp_exchange_declare, Configuration: 
>> Debug Win32 ------
>> 9>  amqp_listen.c
>> 9>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 9>  utils.c
>> 11>------ Build started: Project: amqp_consumer, Configuration: Debug 
>> Win32 ------
>> 9>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 10>  amqp_exchange_declare.c
>> 9>  Generating Code...
>> 10>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 10>  utils.c
>> 12>------ Build started: Project: amqp_bind, Configuration: Debug Win32 
>> ------
>> 10>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 10>  Generating Code...
>> 13>------ Build started: Project: test_tables, Configuration: Debug Win32 
>> ------
>> 11>  amqp_consumer.c
>> 11>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 11>  utils.c
>> 12>  amqp_bind.c
>> 11>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 12>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 11>  Generating Code...
>> 12>  utils.c
>> 13>  test_tables.c
>> 12>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 12>  Generating Code...
>> 13>C:\development\cpp\rabbitmq-c\librabbitmq\amqp.h(552): fatal error 
>> C1083: Cannot open include file: 'amqp_framing.h': No such file or directory
>> 14>------ Build started: Project: ALL_BUILD, Configuration: Debug Win32 
>> ------
>> 14>  Build all projects
>> ========== Build: 2 succeeded, 12 failed, 0 up-to-date, 0 skipped 
>> ==========
>>
>>
>>
>>
>>
>> On Thursday, November 1, 2012 3:00:58 AM UTC+11, Alan Antonuk wrote:
>>>
>>> Check the rabbitmq-c README.md file:
>>>
>>> https://github.com/alanxz/rabbitmq-c/blob/master/README.md
>>>
>>> Follow the instructions for building with CMake
>>>
>>> -Alan
>>>
>>> On Wed, Oct 31, 2012 at 8:06 AM, Tinashe <tinashe... at gmail.com> wrote:
>>>
>>>> Can someone just give me a step by step guide to compile the c++ client 
>>>> in Visual Studio, what I want to do is make a dll in VS C++ 2010.
>>>>
>>>> _______________________________________________
>>>> rabbitmq-discuss mailing list
>>>> rabbitmq... at lists.rabbitmq.com
>>>> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>>>>
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/attachments/20121107/7fe2a70f/attachment.htm>