[rabbitmq-discuss] RabbitMQ Cluster and Haproxy

Marek Majkowski majek04 at gmail.com
Thu Jan 27 11:29:31 GMT 2011


On Wed, Jan 26, 2011 at 21:29, Agarwal, Sumit (GE Healthcare)
<Sumit.Agarwal at ge.com> wrote:
> Hi Marek,
>  I found the issue is with the different version of Erlang I installed on those m/c.

To make clustering work you need exactly the same Erlang version on every node.

>
> -----Original Message-----
> From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Agarwal, Sumit (GE Healthcare)
> Sent: Wednesday, January 26, 2011 1:09 PM
> To: Marek Majkowski
> Cc: Alexis Richardson; rabbitmq-discuss at lists.rabbitmq.com
> Subject: Re: [rabbitmq-discuss] RabbitMQ Cluster and Haproxy
>
> Hi Marek,
>  Do let me know if there is any problem with windows based cluster setup for RabbitMQ with the hostname contains "-" in the name like "32322-CDKS"?
> Regards
> Sumit
>
> -----Original Message-----
> From: rabbitmq-discuss-bounces at lists.rabbitmq.com [mailto:rabbitmq-discuss-bounces at lists.rabbitmq.com] On Behalf Of Agarwal, Sumit (GE Healthcare)
> Sent: Wednesday, January 26, 2011 11:51 AM
> To: Marek Majkowski
> Cc: Alexis Richardson; rabbitmq-discuss at lists.rabbitmq.com
> Subject: Re: [rabbitmq-discuss] RabbitMQ Cluster and Haproxy
>
> Thx I will try it out.
>
> -----Original Message-----
> From: Marek Majkowski [mailto:majek04 at gmail.com]
> Sent: Wednesday, January 26, 2011 11:50 AM
> To: Agarwal, Sumit (GE Healthcare)
> Cc: Alexis Richardson; rabbitmq-discuss at lists.rabbitmq.com
> Subject: Re: [rabbitmq-discuss] RabbitMQ Cluster and Haproxy
>
> On Wed, Jan 26, 2011 at 17:33, Agarwal, Sumit (GE Healthcare) <Sumit.Agarwal at ge.com> wrote:
>>  Please let me know if you have any documentation on RabbitMQ
>> clustering across different M/C and using the HaProxy to do the load
>> balance and failover.
>
> Hi,
>
> I played with HaProxy some time ago and as far as I remember it worked just fine with RabbitMQ.
>
> The configuration I used was straightforward.
> You need to make sure that the mode is
> set to tcp (not http) and that timeouts are sane.
>
> Cheers,
>  Marek
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-discuss at lists.rabbitmq.com
> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
> _______________________________________________
> rabbitmq-discuss mailing list
> rabbitmq-discuss at lists.rabbitmq.com
> https://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
>


More information about the rabbitmq-discuss mailing list