[rabbitmq-discuss] invalid command name "depends_skip_archcheck"

Kalpesh Patel kalpesh.p at directi.com
Tue Sep 28 10:57:06 BST 2010


mac port install for rabbitmq-server not working. following is debug trace.

$ sudo port -d install rabbitmq-server
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rabbitmq-server
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rabbitmq-server
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port rabbitmq-server.
DEBUG: Requested variant i386 is not provided by port rabbitmq-server.
DEBUG: Requested variant macosx is not provided by port rabbitmq-server.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/erlang
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: erlang R14A_0 exists in the ports tree
DEBUG: erlang R14A_0 +darwin_10 is the latest installed
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/erlang
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default 
universal variant
DEBUG: Requested variant darwin is not provided by port erlang.
DEBUG: Requested variant i386 is not provided by port erlang.
DEBUG: Requested variant macosx is not provided by port erlang.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gawk 3.1.8_0 exists in the ports tree
DEBUG: gawk 3.1.8_0  is the latest installed
DEBUG: gawk 3.1.8_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gawk.
DEBUG: Requested variant i386 is not provided by port gawk.
DEBUG: Requested variant macosx is not provided by port gawk.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2  is the latest installed
DEBUG: gettext 0.18.1.1_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_1 exists in the ports tree
DEBUG: expat 2.0.1_1  is the latest installed
DEBUG: expat 2.0.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: No need to upgrade! gawk 3.1.8_0 >= gawk 3.1.8_0
DEBUG: No need to upgrade! erlang R14A_0 >= erlang R14A_0
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.26_0 exists in the ports tree
DEBUG: libxslt 1.1.26_0  is the latest installed
DEBUG: libxslt 1.1.26_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxslt.
DEBUG: Requested variant i386 is not provided by port libxslt.
DEBUG: Requested variant macosx is not provided by port libxslt.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.7_0 exists in the ports tree
DEBUG: libxml2 2.7.7_0  is the latest installed
DEBUG: libxml2 2.7.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant i386 is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 +macosx is the latest installed
DEBUG: zlib 1.2.5_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants:
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: Using group file 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
--->  Computing dependencies for rabbitmq-server
DEBUG: Searching for dependency: erlang
DEBUG: Found Dependency: receipt exists for erlang
DEBUG: Searching for dependency: xmlto
DEBUG: Didn't find receipt, going to depspec regex for: xmlto
DEBUG: Found port in 
file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto
DEBUG: Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
DEBUG: invalid command name "depends_skip_archcheck"
     while executing
"depends_skip_archcheck dblatex findutils coreutils"
     (file "Portfile" line 43)
     invoked from within
"source Portfile"
     invoked from within
"$workername eval source Portfile"
     (procedure "mportopen" line 46)
     invoked from within
"mportopen $portinfo(porturl) $options $variations"
     (procedure "mportdepends" line 66)
     invoked from within
"mportdepends $mport $target"
     (procedure "mportexec" line 35)
     invoked from within
"mportexec $workername $target"
Error: Unable to execute port: invalid command name "depends_skip_archcheck"
To report a bug, see <http://guide.macports.org/#project.tickets>




More information about the rabbitmq-discuss mailing list